Chart
Time Period Option
1.
Displays your data in the dashboard by the selected date
2.
Extends the time period selected above, before or after by a specified number of time periods. Make sure to uncheck the
Compared To selection below in order to do so.
3.
Select Daily Level if the trending data will show as daily. Choose Selected Period Level if the trending should match to the selected
time period level. For example, when Current Month is selected as time period the trending will be at monthly level.
4.
Displays your data in the dashboard by a specific number of past or future days.
5.
Displays your data within the specified date range.
6.
Use up to today's day data or full time period data for historical data comparison.
7.
Displays your data using the Fiscal year as your selected time period.
Data Option
1.
The measure will be displayed in the component.
2.
The date field associated with the selected measures. This is used for conditioning purpose.
3.
The type of the chart to display for the selected measure.
4.
The series of the chart to display for the selected measure.
5.
Custom filter option to further filter the measures selected above. Use the Check Syntax box before clicking OK to ensure the filter
will be applied effectively.
6.
Choose how you want to group the measure(s).
1
2
3
4
5
6
7
1
2
3
4
5
6
Interaction Option
1.
Preset the other components with which you want this component’s data to react to when they are selected. Under each
component option you can choose ALL or a Sequence number (#1) which can be assigned to each component so that this data
only reacts when a certain numbered component is selected.
2.
To pass the measure and filter through to this component when a measure selector component is changed select the Replace
with Main Measure or Replace with Mouse Over Measure box. To pass only the filter from a measure selector component when
changed, select No.
3.
Replace Group By when interacting with a measure selector.
4.
Replace Chart Type when interacting with a measure selector.
5.
Select Yes to make this component a dashboard selector so that other preset components will refresh when it is selected. Select
No if you do not want any other data to react to this selection.
6.
You can assign different sequence numbers to multiple of the same type of component to differentiate them.
7.
If you want the component to wait to load any data until you have made a selection from another component, select the Refresh
On Interaction Only box.
Display Option
1.
Select a data level within your organization to limit data access for this component. Or select the green button to select a
specific role within your organization.
2.
Displays and sums up all of the users directly below the above selected level or role by the Direct Report. Or you can display
and sum up all of the users in all the levels below the selected data level by choosing the Subordinate box.
3.
Sort how you would like the column to be displayed by choosing from the drop down menu. Also choose what order you want
your data to be displayed and how many records you want to pull data from.
4.
Choose how you would like the labels for your chart displayed by choosing from the drop down bars for each part of the chart.
5.
Add some emphasis to your component by choosing the Show Border and/or With Shadow boxes and choose a custom color
and size for your border.
1
2
3
4
5
7
6
1
2
3
4
5
Time Period Option
1.
Displays your data in the dashboard by the selected date
2.
Extends the time period selected above, before or after by a specified number of time periods. Make sure to uncheck the
Compared To selection below in order to do so.
3.
Select Daily Level if the trending data will show as daily. Choose Selected Period Level if the trending should match to the selected
time period level. For example, when Current Month is selected as time period the trending will be at monthly level.
4.
Displays your data in the dashboard by a specific number of past or future days.
5.
Displays your data within the specified date range.
6.
Use up to today's day data or full time period data for historical data comparison.
7.
Displays your data using the Fiscal year as your selected time period.
Data Option
1.
The measure will be displayed in the component.
2.
The date field associated with the selected measures. This is used for conditioning purpose.
3.
The type of the chart to display for the selected measure.
4.
The series of the chart to display for the selected measure.
5.
Custom filter option to further filter the measures selected above. Use the Check Syntax box before clicking OK to ensure the filter
will be applied effectively.
6.
Choose how you want to group the measure(s).
1
2
3
4
5
6
7
1
2
3
4
5
6
Interaction Option
1.
Preset the other components with which you want this component’s data to react to when they are selected. Under each
component option you can choose ALL or a Sequence number (#1) which can be assigned to each component so that this data
only reacts when a certain numbered component is selected.
2.
To pass the measure and filter through to this component when a measure selector component is changed select the Replace
with Main Measure or Replace with Mouse Over Measure box. To pass only the filter from a measure selector component when
changed, select No.
3.
Replace Group By when interacting with a measure selector.
4.
Replace Chart Type when interacting with a measure selector.
5.
Select Yes to make this component a dashboard selector so that other preset components will refresh when it is selected. Select
No if you do not want any other data to react to this selection.
6.
You can assign different sequence numbers to multiple of the same type of component to differentiate them.
7.
If you want the component to wait to load any data until you have made a selection from another component, select the Refresh
On Interaction Only box.
Display Option
1.
Select a data level within your organization to limit data access for this component. Or select the green button to select a
specific role within your organization.
2.
Displays and sums up all of the users directly below the above selected level or role by the Direct Report. Or you can display
and sum up all of the users in all the levels below the selected data level by choosing the Subordinate box.
3.
Sort how you would like the column to be displayed by choosing from the drop down menu. Also choose what order you want
your data to be displayed and how many records you want to pull data from.
4.
Choose how you would like the labels for your chart displayed by choosing from the drop down bars for each part of the chart.
5.
Add some emphasis to your component by choosing the Show Border and/or With Shadow boxes and choose a custom color
and size for your border.
1
2
3
4
5
7
6
1
2
3
4
5
